製品

情報


ホームページ


2007年7月15日版

家庭用浄水装置, 逆浸透膜フィルター,  シャワーフィルター,  全家屋型フィルター
Crystal Pure Water Company (1984創業)、ボストン郊外ハーバード町
営業時間: 10 am - 7 pm (US EST), 午前零時 - 9 am (ジャパンタイム)
電話 US-978-456-8372, 日本語でお気軽にどうぞ

純水販売業者用、ホテル、レストラン、病院、学校
綺麗で美味しく安全な水を必要量だけ浄化

Commercial/Industrial 大型フィルター

Page 目録
大型工業用RO システム
元水の準備
  • ゴミを除く
  • 塩素と有機物質を除く
  • 硬水を軟化
  • 鉄分、マンガン、硫化水素(H2
    Compact II RO : 800-150 GPD
    Compact I RO 型: 800-150 GPD
    Wall Mounted RO 型: 4,500-450 GPD
    Frame Mounted Vertical RO: 9,000-1,500 GPD
  • Economy Frame Mounted RO: 9,000-1,500 GPD
    Frame Mounted Horizontal: 21,000-9,000 GPD
    紫外線 UV, オゾンOzone 殺菌装置
    純水タンク
    再加圧ポンプ
    純水販売店用完備システム: 6,000-1,500 GPD
    純水販売店用フィルテーブル
    純水販売転用 ボトルフィルシステム
    純水販売店用 ボトル洗浄殺菌システム
    海水浄化RO: 14,400-100 GPD

    値段, アフターケア, 品質保証、商品返還
    • 米国製の最高機能、最新式浄水器がリーズナブルなプライスで得られます
    • 工場からの直接発送なので高級製品が市場の半額以下でお届けできます
    • プロフェッショナルによる万全のアフターケアは全部フリーです
    • 浄水装置に標準なメーカーの1年商品保証、フィルターを除くパーツは5年
    • 万全の品質保証、保証期間が過ぎましてもお気軽に御相談下さい
    • 弊社は取り付けを含めた現地浄水装置の水漏りや損害に責任は持ちませんのでご注意
    目下ウエッブサイト工事中、10 月1日終了の見込み、ご辛抱願います


    大型工業用逆浸透膜ROシステム
    事務所, 工場, 病院, 学校, レストラン, 純水販売業, ボート, ヨット, 汽船の海水浄化


    何故 PureWaterExpress.com から買うか?
    • 殊に大型 RO システムは真剣なプランニング、設計、システム要素選択、厳密なサイズマッチが必要
    • 元水の水質, システム応用目的, システム操作環境条件, 施設への初期投資予算、ランニングコスト, 全てを考慮に入れる
    • オーバー設計は高価且つ資源の浪費, アンダー設計は無謀且つ危険
    • PureWaterExpress.com社並びに発送元メーカーの長年経験のあるエンジニア陣と無料の相談可能
    • 世界的に有名な銘柄メーカーの装置が組立工場から直接発送、リーズナブルなプライス、保証つき
    • 大型ROシステムの相談、設計、販売、設置後のサポート、創業の1984年より継続
    大型ROシステムの典型的な構成 - 図面
    • RO前における元水の準備
    • RO システム本体
    • 貯水タンク
    • 貯水タンク内の殺菌 - 温水地帯では必須
    • 再加圧ポンプ
    • ポストROフィルター      Top  

    大型 RO への元水準備
    逆浸透膜メンブレンの寿命を延ばし、浄化能率(純水と汚水廃棄の比率)を高める為


    大型のROメンブレンは一般に高価なので、元水を通常のフィルターで前処理をしたほうが経済的になる。 ROに入る水が綺麗であればあるほどメンブレンは長持ちする。しかも浄化能率を高くセットアップして水の消費量を抑える事が可能になる。

    RO元水の条件

    • Water temp: 85F max
    • TDS: 2,000 ppm max
    • Iron tolerance: 0.5 ppm max
    • Hydrogen sulfide: must be removed
    • Silica tolerance: less than 125 ppm, antiscalant should be considered for over 75 ppm
    • Turbidity: must be removed
    • Hardness: over 10 gpg should be softened
    • pH range: 3-11
    大型ROシステムの設計に当たり元水の 水質検査 は絶対必要である。大抵の水は比較的安価にRO用の前処理が可能、と言うのが20年の経験からの結論であってその幾つかの装置が以下に見られる。 但し前処理の流量は希望する純水量と廃棄される汚水量の和であって、比較的保守的に設計する必要がある。

    一日当たり何リットル(LPD)で表現されるメンブレンの浄化速度は 水温度77F (25C)と圧力60 psi (4.2 kG/cm2)で定義されており, 実際の条件下の浄水量はそれと違う。To estimate the actual production, GPD rating has to be divided by 1.19 at 68F (20C), by 1.47 at 59F (15C), by 1.89 at 50F (10C), by 2.58 at 41F (5C). The temperature derating effect must be included in your system design consideration.       Top  


    Turbidity Reduction - ゴミ, 砂, 石ころ, 錆び, 等の除去


    Turbo-clean, auto-flush mesh screen type sediment filter - 140F water temperature and 150 psi rated


    Model TAF-750E, 3" or 2" turbo-clean, electric auto-flush sediment filter
    • Electricity is required, 110 volts 60 hz standard, 220 volts 50-60 hz available
    • Electronic timer operates hydraulic auto flush valve, purges accumulated dirt
    • Programming allows the flush cycle from once every 5 minutes to seven days
    • Standard coupling is 3" or 2" male pipe thread, flange coupling also available
    • Available mesh sizes are, 500, 300, 200, 130, 100, 80 and 50 microns
    • Mesh size has to match water condition, you may have to try a few meshes
    • Some people string two units in series with different mesh sizes

    Cost for 2" turbo-clean, auto-flush sediment filter

    • 2" unit supports 110 GPM flow and fits within 12" w. x 26" h. x 7.4" d. space envelope
    • Complete 2" unit with a mesh $3,239, shipping from CA is extra
    • A spare mesh screen of any size $230, shipping from CA is extra

    Model TAF-500H, 3" or 2" turbo-clean, hydraulic auto-flush sediment filter
    • 110 volts AC not required, programmable timer operates on internal battery
    • Electronic timer operates hydraulic auto flush valve, purges accumulated dirt
    • Programming allows the flush cycle from once every 5 minutes to seven days
    • Standard coupling is 3" or 2" male pipe thread, flange coupling also available
    • Available mesh sizes are, 500, 300, 200, 130, 100, 80 and 50 microns
    • Mesh size has to match water condition, you may have to try a few meshes
    • Some people string two units in row with different mesh sizes

    Cost for 2" turbo-clean, auto-flush sediment filter

    • 2" unit supports 100 GPM flow and fits within 22" x 14" x 7.4" space envelope
    • Complete 2" unit with a mesh $3,121, shipping from CA is extra
    • A spare mesh screen of any size $178, shipping from CA is extra       Top  

    Manual-clean transparent bowl mesh screen type sediment filter - removal of simple turbidity

    Back to models & prices

    Easy to see and flush, washable mesh filter lasts forever
  • Mesh screen in a chemical resistant transparent bowl
  • Water swirls down and keeps the mesh screen clean
  • Coarse mesh sizes made of stainless, fine mesh polyester
  • Flush out sediment with a flick of the drain valve
  • Can be taken apart, washed, the unit lasts indefinitely
  • Rated for 120F water temp and 150 psi


  • Slip connection of up to 2"
  • 2" unit supports 100 GPM flow, 1-1/2" 50 GPM and 1" 20 GPM
  • Screens: 24 mesh (711 microns), 30 (533), 40 (381), 60 (254), 100 (152), 140 (104), 250 (61), 500 (30) and 1,000 (15)
  • You may have to try a few different sizes to match water
  • If too fine, it plugs up, if too coarse, not much filtering
  • Some install a few units in a row with different mesh sizes
  • Cost

  • 2" slip complete unit with a mesh screen $260, a spare mesh screen of any size $84, shipping is included
  • 1-1/2" slip complete unit with a mesh screen $215, a spare mesh screen of any size $74, shipping is included
  • Buy a complete unit and a spare mesh (different size), we exchange meshes free (you return the old)
  • Multi Media Sediment Filter - removal of multi-constituent high value complex turbidity

    Multi-media filter

    Fleck backwash control
    2750 valve


    Click to order
    What it does
  • Removes large amounts of complex turbidity
  • Multi-layers of high specific gravity media
  • Anthracite coal, calcined aluminum silicate and garnet
  • Sand, rust, dirt and such are caught in the layers
  • Get blown away during backwash
  • Important: multi-media backwash requires robust water flow with sustained strong water pressure
  • Media to last several years with proper backwash
  • No chemical regeneration required, nothing is imparted into the water
  • Unit price, loaded, ready to install

    Capacity in
      cubic foot  
    Tank
      diam/tall  
     Fleck 
      valve  
      Service  
     flow rate 
      Backwash  
     flow rate 
      Complete  
    unit price
      Ship  
     wgt 
    17.6
    36"/72"
    3150
    69 GPM
    85 GPM
    $4,621
       lbs  
    12.5
    30"/72"
    3150
    48 GPM
    60 GPM
    $3,956
       lbs  
    8.0
    24"/72"
    2850
    30 GPM
    40 GPM
    $2,005
       lbs  
    6.0
    21"/69"
    2850
    24 GPM
    30 GPM
    $1,687
       lbs  
    4.4
    18"/65"
    2750
    18 GPM
    25 GPM
    $1,294
       lbs  
    Shipping from MN is additional, MN residents must add state sales tax

  • RO GPD capacity plus the expected waste flow determine the recommended volume
  • Requires robust backwash flow rate to keep the media clean, see table
  • Multi media can be washed/regenerated with Clorox
  • Replacement cost: different media in 50 lbs bag each, call for prices          Top  

  • Triple or Double Big Blue Combination Sediment Filter - removal of medium value turbidity



    Special price: $576
    Click to order online


    Special price: $445
    Click to order online
    What it does
  • Sometimes placed just in front of an RO unit
  • Reduces dirt, sand, rust particles and other sediments
  • Large cartridges (each 4-1/2" diam, 20" tall)
  • Flow rates of 20 GPM, pressure drops of 3 psi, are typical
  • 1-1/2" female pipe thread, inlet/outlet
  • Triple BB is 23-1/4" wide x 8-1/2" deep x 26-1/2" high
  • Double BB is 15-1/4" w x 8-1/2" d x 26-1/2" h
  • Special sale prices include shipping
  • Operating cost

  • Replacement filters: 75/25 or 50/5 micron dual gradient sediment or 5 micron sediment $60 each
  • Shipment from CA to you is additional, and CA residents add sales tax           Top  


  • Loose Granular Carbon for Chlorine and Organic Chemical Reduction
    The more chemicals carbon removes, the longer the membrane will last


    Backwash carbon filter

    Fleck backwash control
    2750 valve


    Click to order
    What it does
  • Reduces chlorine, odor, tri-halo methane THM, gas additive MTBE, and organic pollutants such as EDB, PCB, benzene and TCE
  • We use HAC, High Activity Carbon from Clack Corp
  • Protects TFC RO membrane
  • Hard water should be additionally softened
  • Unit price, loaded and ready to install

    Capacity in
      cubic foot  
    Tank
      diam/tall  
     Fleck 
      valve  
      Service  
     flow rate 
      Backwash  
     flow rate 
      Complete  
    unit price
      Ship  
     wgt 
    17.6
    36"/72"
    3150
    42 GPM
    70 GPM
    $4,853
       lbs  
    12.5
    30"/72"
    3150
    29 GPM
    50 GPM
    $4,176
       lbs  
    8.0
    24"/72"
    2850
    19 GPM
    30 GPM
    $2,335
       lbs  
    6.0
    21"/69"
    2850
    14 GPM
    25 GPM
    $1,860
       lbs  
    4.4
    18"/65"
    2750
    11 GPM
    20 GPM
    $1,339
       lbs  
    Shipping from MN is additional, MN residents must add state sales tax

  • Supply flow rate requirement for the RO unit(s) determines the carbon filter size
  • Must process the sum of the particular GPD RO permeate flow plus projected waste flow
  • Carbon replacement: 1 cubic foot (31 lbs) coconut based granular carbon is $64 plus shipping from MN
  • Larger volume media shipment discount available, please call 888-928-3794
  •       Top  


    Hardness Reduction - twin tank softener for mineral removal at all times


    Twin alternating tank softener with #9000 valve

    Fleck #9000 valve, 1" bypass

    What it does
  • Water softener removes excess minerals which foul up RO membrane
  • Twin tank alternating backwash means water going through is softened at all times
  • Hardness, TDS and GPD determine the softener size, generally the larger the better
  • Metered backwash (also known as DIR) takes place after a preprogrammed amount of water is used


  • UMetered unit price, loaded and ready to install - other sizes than those listed below are also available, please call

    Capacity in
      cubic foot  
      Twin tanks  
      diam/tall  
      Brine tank  
      diam/tall  
     Fleck 
      valve  
     Pipe 
      size  
      Critical  
      flow rate  
      -15 psi  
      flow rate  
      -25 psi  
      flow rate  
      Backwash  
     flow rate 
      Complete  
    unit price
    36
    48"/72"
    50"/60"
    3900
    3"
    180 GPM
    205 GPM
    278 GPM
    60 GPM
    $25,950
    26
    42"/72"
    42"/60"
    3900
    3"
    130 GPM
    197 GPM
    266 GPM
    45 GPM
    $24,136
    20
    36"/72"
    42"/60"
    3150
    2"
    100 GPM
    84 GPM
    111 GPM
    36 GPM
    $13,893
    15
    31"/50"
    39"/48"
    3150
    2"
    75 GPM
    73 GPM
    105 GPM
    25 GPM
    $12,652
    10
    24"/72"
    30"/50"
    9500
    1.5"
    38 GPM
    38 GPM
    51 GPM
    15 GPM
    $5,620
    6
    21"/54"
    24"/50"
    9500
    1.5"
    30 GPM
    39 GPM
    50 GPM
    12 GPM
    $4,644
    3
    14"/65"
    24"/50"
    9500
    1.5"
    15 GPM
    29 GPM
    41 GPM
    5 GPM
    $3,390
    Shipping from MN is additional, MN residents must add state sales tax                Top  


    Birm Filter - iron and manganese reduction


    Backwash Birm filter

    Fleck backwash control
    2750 valve


    Click to order
    What it does
  • Birm a granular catalytic medium, click for detail
  • Removes iron and manganese
  • Thin oxidized layer forms on the media surface
  • Gets blown away during backwash cycle
  • Requires robust flow rate backwash, see table
  • Original Birm media seen to last several years
  • Media can be washed with Clorox several times
  • No chemical regeneration required
  • Nothing is imparted into the filtered water
  • Replacement: 1 cf of Birm (42 lbs) $85 plus shipping from MN
  • Unit price, loaded and ready to install

    Capacity in
      cubic foot  
    Tank
      diam/tall  
     Fleck 
      valve  
      Service  
     flow rate 
      Backwash  
     flow rate 
      Complete  
    unit price
      Ship  
     wgt 
    17.6
    36"/72"
    3150
    32 GPM
    70 GPM
    $8,299
       lbs  
    12.5
    30"/72"
    3150
    22 GPM
    50 GPM
    $7,142
       lbs  
    8.0
    24"/72"
    2850
    14 GPM
    30 GPM
    $3,993
       lbs  
    6.0
    21"/69"
    2850
    11 GPM
    25 GPM
    $3,181
       lbs  
    4.4
    18"/65"
    2750
    8 GPM
    20 GPM
    $2,290
       lbs  
    3.5
    16"/65"
    2750
    6 GPM
    16 GPM
    $1,839
       lbs  
    Shipping from MN is additional, MN residents must add state sales tax


    Compact II Model Reverse Osmosis System - 800 GPD, 450, 250 and 150


    Back to models & prices


    Click to order
    What it does
  • Works with chlorinated municipal water or well water
  • Prefilters: Slimline (2-1/4" dia x 20" long) sediment and carbon
  • TFC membrane at 200 psi, 95-99% salt rejection
  • One year factory warranty
  • PVC membrane housing, powder-coated steel bracket
  • Feed water solenoid valve, high pressure brass fittings and nylon tubing
  • Inlet/outlet pre-filter gauges, liquid filled system gauge
  • Additional pressure gauge for sealed storage tank
  • Adjustable waste/recycle flow controls, optimum water recovery
  • Storage tank pressure switch, low pressure safety switch
  • Rotary vane pump, 3/4 hp motor (COM II-4), 1/2 hp motor (COM II-3-2-1)
  • Straightforward installation, simple operation
  • Compact design with highest quality US components, needs minimal space
  • Source water test/analysis is recommended prior to unit purchase
  • Unit and operating cost
  • Unit price com II-4 $1,995, com II-3 $1,756, com II-2 $1,548, com II-1 $1,488
  • Unit price is for the RO unit, does not include external pretreatment, pure water storage tank or repressurization pump
  • Crating/shipping the RO unit from CA is extra, CA residents add state sales tax
  • Replacement filters: Slimline (2-1/4" dia x 20" long) sediment $12, carbon $45, TFC RO membrane $370 (800 GPD), $310 (450 GPD), $170 (250 GPD), $120 (150 GPD), shipment is extra, CA residents add state sales tax


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Piping
    inlet / waste / prod  
      Size/weight  
      COM II-4  
      900-800  
     4" dia x 21" long, 1 each 
     1/2"   3/8"   3/8" 
     14" x 16" x 30" tall, 95 lbs 
      COM II-3  
      600-450  
     4" dia x 14" long, 1 each 
     3/8"   3/8"   3/8" 
     14" x 16" x 30" tall, 92 lbs 
      COM II-2  
      400-250  
     2.5" dia x 21" long, 1 each 
     3/8"   3/8"   3/8" 
     14" x 16" x 30" tall, 88 lbs 
      COM II-1  
      200-150  
     2.5" dia x 14" long, 1 each 
     3/8"   3/8"   3/8" 
     14" x 16" x 30" tall, 85 lbs 

    Source water pre-treatment
  • Additional pre-treatment should be provided in front of the 800 and 450 GPD units for membrane protection
  • The built-in pre-filtration is sufficient for the 250 and 150 GPD models
  • Available options at added cost

  • Stainless pump, stainless membrane housing, stainless needle valves, product and waste flow meters
  • Automatic (hourly) or manual flush, 220 volt pump motor, float switch for atmospheric tank, pretreatments
  •   Top  


    Compact I Model Reverse Osmosis System - 800 GPD, 450, 250 and 150


    What it does
  • Works with chlorinated municipal water or well water
  • Prefilters: two Big Blue Short (4-1/2" x 10") carbons, one sediment
  • TFC RO membrane operating at 200 psi, 95-99% salt rejection
  • One year factory warranty
  • Water storage tank and repressurization pump are not included
  • Straightforward installation, simple operation
  • Compact design with highest quality US components
  • Inlet/outlet pre-filter gauges, liquid filled system gauge
  • Storage tank pressure switch, low pressure safety switch
  • Feed water inlet solenoid valve
  • Rotary vane pump, 3/4 hp motor (COM I-4), 1/2 hp (COM I-3-2-1)
  • Stainless steel fixed waste and recycle flow controls
  • Source water test/analysis is recommended prior to unit purchase
  • Back to products & prices


    Click to order
    Unit and operating cost
  • Unit price com I-4 $1,760, com I-3 $1,549, com I-2 $1,284, com I-1 $1,219
  • Unit price is for the RO unit, does not include external pretreatment, pure water storage tank or repressurization pump
  • Crating/shipping the RO unit from CA is extra, CA residents add state sales tax
  • Replacements: sediment $12, two 10" precarbons $15 each, TFC RO membrane $370 (800 GPD), $310 (450 GPD), $170 (250 GPD), $120 (150 GPD), shipment from CA to you is additional, CA residents add state sales tax


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Piping
    inlet / waste / prod  
      Size/weight  
      COM I-4  
      900-800  
     4" dia x 21" long, 1 each 
     1/2"   3/8"   3/8" 
     26" x 16" x 18" tall, 74 lbs 
      COM I-3  
      600-450  
     4" dia x 14" long, 1 each 
     3/8"   3/8"   3/8" 
     21" x 16" x 18" tall, 72 lbs 
      COM I-2  
      400-250  
     2.5" dia x 21" long, 1 each 
     3/8"   3/8"   3/8" 
     26" x 16" x 18" tall, 68 lbs 
      COM I-1  
      200-150  
     2.5" dia x 14" long, 1 each 
     3/8"   3/8"   3/8" 
     21" x 16" x 18" tall, 65 lbs 

    Source water pre-treatment
  • Additional pre-treatment should be provided in front of the 800 and 450 GPD units for membrane protection
  • The built-in pre-filtration is sufficient for the 250 and 150 GPD models
  • Available options at added cost

  • Stainless pump, stainless membrane housing, fiberglass panel for wall mount, adjustable waste valve
  • Automatic (hourly) or manual flush, 220 volt pump motor, float switch for atmospheric tank, pretreatments
  •   Top  


    Wall Mounted Model RO - 4,500 GPD, 3,000, 1,500


    Back to models & prices


    Click to order
    What it does
  • TFC RO membrane operating at 200 psi, 95-99% salt rejection
  • One year factory warranty
  • Stainless multi-stage pump (WM-5 through WM-3)
  • 1/2 HP rotary vane pump (WM-2 & WM-1)
  • Fiberglass wall mount panel, PVC membrane housing, high pressure tubing
  • Inlet/outlet pre-filter gauges, liquid filled system gauge
  • Adjustable stainless waste/recycle needle valve (WM-5 through WM-2)
  • Fixed stainless waste/recycle flow control (WM-1 only)
  • Feed water solenoid valve, designed for optimum water recovery
  • Product and waste flow meters (WM-5 through WM-2)
  • Pure water storage tank nor repressurization pump included
  • Compact design, highest quality US components, minimal space
  • Straightforward installation, simple operation
  • Source water test/analysis is recommended
  • Unit and operating cost

  • Unit price $6,519 (WM-3), $5,469 (WM-2), $4,156 (WM-1)
  • Replacement TFC RO membrane: $550 each (4" dia x 40", 1,500 GPD)
  • Shipping from CA is extra, CA residents add state sales tax, crating necessary for WM-3 through WM-1


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Piping
    inlet / waste / prod  
      Size/weight  
      WM-3  
      5,400-4,500  
     4" dia x 40" long, 3 each 
     3/4"   1/2"   1/2" 
     32" x 15" x 52" tall, 200 lbs 
      WM-2  
      3,600-3,000  
     4" dia x 40" long, 2 each 
     3/4"   1/2"   1/2" 
     28" x 15" x 52" tall, 175 lbs 
      WM-1  
      1,800-1,500  
     4" dia x 40" long, 1 each 
     3/4"   1/2"   1/2" 
     28" x 15" x 52" tall, 150 lbs 

    Available options at added cost
  • Stainless membrane housing, stainless needle valves (WM-3 thru WM-1)
  • Automatic (hourly) or manual flush, 220 volt pump motor, 50 Hz
  • Digital or analog TDS monitor, hour meter, recycle flow meter, tank pressure switch, product diversion
  • IEC contactor with overload, pre-treat lock-out with light pretreatments         Top  

  • Economy Frame Mounted Vertical RO - 4,500 GPD, 3,000 and 1,500


    Back to models & prices


    Click to order
    What it does
  • Brand new model, emphasis on functionality and durability over fancy looks
  • TFC RO membrane operating at 200 psi, 95-99% salt rejection
  • One year factory warranty
  • Source water test/analysis is recommended
  • Stainless steel multi-stage Webtrol pump, fused motor circuit
  • Electrical control junction box with on/off safety switch
  • PVC membrane housing, powder-coated steel bracket
  • High pressure brass fittings and nylon tubing
  • Liquid filled system gauge
  • Adjustable stainless waste needle valve
  • Adjustable dual level float switch, low pressure safety switch
  • Feed water inlet solenoid valve
  • Neither pure water storage tank nor repressurization pump included
  • Straightforward installation, simple operation
  • Compact design, highest quality US components, minimal space
  • Unit and operating cost
  • Unit price $7,901 (ECFMV-6), $6,956 (ECFMV-5), $6,064 (FMV-4), $4,901 (ECFMV-3), $3,964 (ECFMV-2), $3,019 (FMV-1), plus a wooden shipping crate $125
  • Replacement filters: Big Blue sediment, 4-1/2" diameter x 20" length $60, 1,500 GPD TFC RO membrane, 4" diameter x 40" length $550 each
  • Shipment from CA is additional, CA residents add state sales tax, no need for a crate for factory pickup


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Pump  
    Piping
      inlet / waste / prod  
      Dimensions  
      ECFMV-6  
      10,800-9,000  
     4" dia x 40" long, 6 each 
     multi-stage 3 hp 
     1"   1/2"   1/2" 
     17" x 16" x 52" tall 
      ECFMV-5  
      9,000-7,500  
     4" dia x 40" long, 5 each 
     multi-stage 3 hp 
      1"   1/2"   1/2" 
     17" x 16" x 52" tall 
      ECFMV-4  
      7,200-6,000  
     4" dia x 40" long, 4 each 
     multi-stage 3 hp 
     1"   1/2"   1/2" 
     17" x 16" x 52" tall 
      ECFMV-3  
      6,000-4,500  
     4" dia x 40" long, 3 each 
     multi-stage 2 hp 
     1"   1/2"   1/2" 
     17" x 16" x 52" tall 
      ECFMV-2  
      4,000-3,000  
     4" dia x 40" long, 2 each 
     multi-stage 2 hp 
      1"   1/2"   1/2" 
     17" x 16" x 52" tall 
      ECFMV-1  
      2,000-1,500  
     4" dia x 40" long, 1 each 
     multi-stage 1 hp 
     3/4"   1/2"   1/2" 
     17" x 16" x 49" tall 

    Available options at added cost

  • Product and waste flow meters, recycle valve (requires waste flow meter in place)
  • Pressure gauges before and after pre-filter, stainless membrane housings
  • Manual flush, 50 Hz conversion, tank pressure switch         Top  

  • Frame Mounted Vertical Model RO - 10,800, 9,000, 7,200, 5,400, 3,600, 1,800 GPD minimum


    What it is and does
  • Floor standing model, durable powder-coated frame
  • TFC RO membrane operating at 200 psi, 95-99% salt rejection
  • Standard unit uses Fluid Systems TFC membrane(s) 1,800 GPD each
  • One year factory warranty
  • PVC membrane housing standard, stainless option as shown
  • Liquid filled high pressure gauge, inlet/outlet pre-filter gauges
  • Adjustable waste/recycle needle valves
  • Product and waste flow meters, designed for optimum water recovery
  • Dual level tank switches, low pressure safety switch
  • Feed water solenoid valve, stainless steel multi-stage pump
  • Straightforward installation, simple operation
  • Compact design, highest quality US components, minimal space
  • Source water test/analysis is recommended
  • Back to products & prices


    Click to order
    Unit and operating cost
  • Unit price $9,625 (FMV-6), $8,750 (FMV-5), $7,699 (FMV-4), $6,519 (FMV-3), $5,469 (FMV-2), $4,156 (FMV-1)
  • Crating/shipping from CA is extra, CA residents add state sales tax
  • Neither pure water storage tank nor repressurization pump included
  • Replacement Filmtec TFC membrane: $550 (4" dia x 40", 2,400 GPD) each, Fluid Systems membrane: $470 (4" dia x 40", 1,800 GPD)
  • Shipment from CA to you is additional, CA residents add state sales tax


  • Available options - call us for price/explanation
  • Power supply variances from the standard supply (220 volts 60Hz single phase), call for add-on quote
  • 3-phase, IEC overload contactor option $342
  • Automatic membrane chamber flush option $420
  • Hanna TDS digital monitor option $440
  • Stainless needle valve upgrade option $252
  • High pressure cutoff, auto start option $550
  • Pretreatment lockout logic option $210
  • Special wooden shipping crate $415


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Pump  
    Piping
      inlet / waste / prod  
      Dimensions  
      FMV-6  
      13,000-10,800  
     4" dia x 40" long, 6 each 
     multi-stage 3 hp 
     1"   1/2"   1/2" 
     29" x 29" x 61" tall 
      FMV-5  
      10,800-9,000  
     4" dia x 40" long, 5 each 
     multi-stage 3 hp 
     1"   1/2"   1/2" 
     29" x 29" x 61" tall 
      FMV-4  
      8,640-7,200  
     4" dia x 40" long, 4 each 
     multi-stage 3 hp 
     1"   1/2"   1/2" 
     29" x 29" x 61" tall 
      FMV-3  
      6,480-5,400  
     4" dia x 40" long, 3 each 
     multi-stage 2 hp 
     1"   1/2"   1/2" 
     29" x 29" x 61" tall 
      FMV-2  
      4,320-3,600  
     4" dia x 40" long, 2 each 
     multi-stage 2 hp 
      1"   1/2"   1/2" 
     24" x 29" x 57" tall 
      FMV-1  
      2,160- 1,800  
     4" dia x 40" long, 1 each 
     multi-stage 1 hp 
     3/4"   1/2"   1/2" 
     24" x 29" x 57" tall 
          Top  


    Frame Mounted Horizontal RO - 21,000 GPD, 18,000, 15,,000, 12,000, 9,000


    What it does
  • TFC RO membrane at 200 psi, 95-99% salt rejection
  • One year factory warranty
  • Source water test/analysis is recommended
  • Skid mounted, durable powder-coated steel frame
  • PVC membrane housing, high pressure brass fittings
  • Inlet/outlet pre-filter and liquid filled system gauges
  • Adjustable stainless waste/recycle fixed flow control
  • Membrane at 200 psi, optimum water recovery
  • Dual level tank switches, low pressure safety switch
  • Dependable relay logic safety and control circuit
  • Stainless steel multi-stage centrifugal pump
  • Sampling valves to monitor each membrane vessel
  • Compact design, highest quality US components
  • Back to products & prices


    Click to order
    Unit and operating cost
  • Unit price $28,530 (FMH-14), $28,577 (FMH-12), $25,758 (FMH-10), $23,213 (FMH-8), $16,983 (FMH-6)
  • Crating/shipping from CA is extra, CA residents add state sales tax
  • Replacement membranes: 4" dia x 40" length TFC RO membrane $550 each (1,500 GPD)
  • Neither pure water storage tank nor repressurization pump included
  • Higher flow rates above 24,000 GPD are available


  • Dimensions
    Model
      Minimum
    GPD  
      Membrane  
      Pump  
    Piping
      inlet / waste / prod  
      Dimensions  
      FMH-14  
      23,000-21,000  
     4" dia x 40" long, 14 each 
     7.5 hp 
     1-1/2"   1"   1" 
     110" x 31" x 66" tall 
      FMH-12  
      20,000-18,000  
     4" dia x 40" long, 12 each 
     7.5 hp 
     1-1/2"   1"   1" 
     110" x 31" x 66" tall 
      FMH-10  
      17,400-15,000  
     4" dia x 40" long, 10 each 
     7.5 hp 
     1-1/2"   1"   1" 
     110" x 31" x 66" tall 
      FMH-8  
      14,400-12,000  
     4" dia x 40" long, 8 each 
     5 hp 
     1-1/2"   1"   1" 
     110" x 31" x 66" tall 
      FMH-6  
      10,800-9,000  
     4" dia x 40" long, 6 each 
     5 hp 
      1-1/2"   1"   1" 
     110" x 31" x 66" tall 
          Top  


    Commercial/industrial UV Sterilizers - Hydrotech and Sterilight UV series


    Hydrotech UV-BigBoy® series - industrial size model, lasts eons between filter change

    Back to models & prices

    What are they?
  • 4-1/2" diam, 20" tall combination of sediment, carbon and uv
  • Sediment removes sand, dirt, silt, scale, sludge and rust
  • Carbon removes chlorine, odor, fluoride, THM, MTBE, pesticides, organic contaminants, dissolved particulates
  • UV stage kills algae, bacteria and viruses
  • Kill rate greater than 99.9%, 99.99% measured
  • Stainless disinfection chamber, 120 volts 60 Hz lamp standard
  • 200-220 volts, 50-60 Hz optional
  • Flow rate of 15-60 GPM at 60 psi, 1-1/2" FPT

  • Click on the model or price to order online, prices includes shipping in US
    Model
    Price
    Sediment
    Carbon
    UV
    Size & weight
    Canister(s)
    UVBB-3
    $1,149
    x
    x
    x
    23" w x 9" d x 30" h, 52 lbs
    3
    UVBB-2-C
    $1,049
    no
    x
    x
    15" w x 9" d x 30" h, 36 lbs
    2
    UVBB-2-S
    $999
    x
    no
    x
    15" w x 9" d x 30" h, 36 lbs
    2
    UVBB-1
    $759
    no
    no
    x
    8" w x 9" d x 30" h, 20 lbs
    1

  • You get longevity and margin of safety from the big cartridges and lamp, replacements come directly from Hydrotech
  • Sediments: 1 micron absolute (cyst rated) 15 GPM $200, 1 micron nominal poly 20 GPM $75, 30 micron reusable poly 45 GPM $90, 5 micron poly 20 GPM $90, 25 micron poly 45 GPM $85, 100 micron poly 60 GPM $75
  • Carbons: .5 micron block 12 GPM $195, 10 micron block 18 GPM $125, 25 micron radial granular 40 GPM $160
  • UV parts: uv lamp $85, washable (soap and water) quartz sleeve $65, parts shipping extra, please call
  • UV lamp in stainless chamber, ballast for 110 volts 60 hz standard, 220 volts and/or 50 hz available
  • Lamp out alarm options available, either audible signal or shutoff solenoid valve, please call
  • 16,000 microwatt second/cm2 uv, rated for greater than 99.9% kill, 99.99% kill observed
  • Straightforward installation, 1-1/2"" FPT in and out, a plumber should easily install in a few hours
  • Warranty: 5 years on the housing, filters replaced for catastrophic failures at the time of delivery, 15% handling charge for no fault return
  •       Top  

    Sterilight sterilization unit with stainless high flow UV chamber

    Back to models & prices


    Click to order
    What it is
  • Optimum sterilization without the adding harmful chemicals
  • 99.9% destruction of bacteria and viruses at rated flow
  • 7 year warranty on reactor chamber, 1 year for uv lamp, and 5 year pro-rated for other parts
  • 37" long, 5.5" wide, 8" tall, 3.5" cell diameter
  • 120 volt/60 Hz, 110 watts, 39 lamp watts
  • Reactor chamber 304 stainless steel
  • Straightforward installation, simple operation
  • Unit/operating cost - click on the price to order online

  • Unit price: $1,260 (24 gallons per minute), $742 (12 GPM), $595 (8 GPM), $280 (2 GPM), includes shipping in US
  • Lamp warranted for one year continuous operation
  • Replacement lamp: $120, shipping from CA is additional
  • CA residents add state sales tax               Top  

  • Pure Water Storage Tank - pressurized or non-pressurized (open)



    Pressurized bladder tank (closed)
    Model
      Tank capacity  
      Tank size  
      Price  
    WR260
     85 gallon tank, 46 gallon draw down 
     26" dia x 44.4" tall @ 140 lbs"  
    $720
    WR240
     81 gallon tank, 40 gallon draw down 
     21" dia x 62" tall @ 101 lbs"  
    $684
    WR140
     44 gallon tank, 20 gallon draw down 
     21" dia x 36.2" tall @ 66 lbs"  
    $522
    WR120
     32 gallon tank, 15 gallon draw down 
     16" dia x 42.8" tall @ 53 lbs"  
    $414
    WR60
     20 gallon tank, 10 gallon draw down 
     16" dia x 28.8" tall @ 34 lbs"  
    $261
    Options
     Ball valve assembly 
     1" FPT tee for in/out connections 
    $50
    Non-pressurized tank (open) - one piece molded polyethylene
    Model
      Tank capacity  
      Tank size  
      Price  
    TC4000IC
     4,000 gallon tank 
     95" dia x 140" tall & 16" MW"  
    $5,643
    TN3000IC
     3,000 gallon tank 
     95" dia x 105" tall & 16" MW"  
    $3,402
    TN9589IC
     2,500 gallon tank 
     95" dia x 89" tall & 16" MW"  
    $2,682
    TC2000IC
     2,000 gallon tank 
     64" dia x 144" tall & 16" MW"  
    $3,060
    TN64121IC
     1,500 gallon tank 
     64" dia x 121" tall & 16" MW"  
    $2,142
    TC6974IC
     1,000 gallon tank 
     69" dia x 74" tall & 16" MW"  
    $1,359
    TC5670IC
     650 gallon tank 
     56" dia x 70" tall & 16" MW"  
    $1,170
    TC4676IC
     500 gallon tank 
     46" dia x 76" tall & 16" MW"  
    $810
    TC3581IC
     300 gallon tank 
     35" dia x 81" tall & 16" MW"  
    $585
    TC3158IC
     165 gallon tank 
     31" dia x 58" tall & 8" MW"  
    $405
    TC2376IC
     130 gallon tank 
     23" dia x 76" tall & 8" MW"  
    $369
    TC3536IA
     110 gallon tank 
     35" dia x 36" tall & 8" MW"  
    $351
    TB1845IA
     45 gallon tank 
     18" dia x 51" tall & 4" MW"  
    $198

    Bulkhead fittings
      Part number  
      Description  
      Price  
     BF10200SXT 
    $1,260
    $1,160
    WBH100
    $1,060
    $960
    WBH12
    $860
    $760
    BK2
     Factory installed 1" or 1-1/2" 
    $560
    BK1
     Factory installed 1/2" or 3/4" 
    $560
    Storage tanks:
  • MW=manway opening
  • Indoor or outdoor use (uv stabilized)
  • High impact and chemical resistant
  • Color is translucent or opaque
  • FOB points: CA, IL, TN, PA, NY, FL, HI
  • Crating/shipping is additional
  • State tax applies for in-state sales
  •   Top  


    Repressurization System - repressurizes RO water stored in open tank


    Back to models & prices


    Click to order
    Repressurization system for open tank water
      Part number  
      Flow rate  
      Pump  
      Ballast tank  
      Price  
    RP1-40
     19.5 gpm 
     1 HP 
     40 gallon 
    $1,521
    RP1-20
     19.5 gpm 
     1 HP 
     20 gallon 
      $1,395  
    RP1-10
     19.5 gpm 
     1 HP 
     10 gallon 
    $1,179
    RP3/4-40
     7.5 gpm 
     3/4 HP 
     40 gallon 
    $1,422
    RP3/4-20
     7.5 gpm 
     3/4 HP 
     20 gallon 
    $1,305
    RP3/4-10
     7.5 gpm 
     3/4 HP 
     10 gallon 
    $1,080
    RP1/2-40
     6.5 gpm 
     1/2 HP 
     40 gallon 
    $1,305
    RP1/2-20
     6.5 gpm 
     1/2 HP 
     20 gallon 
    $1,242
    RP1/2-10
     6.5 gpm 
     1/2 HP 
     10 gallon 
    $1,000
    Shipping from CA is additional, CA residents must add state sales tax
      Top  


    Full Water Store Station - 6,000 GPD,  4,500,  3,000,  1,500


    What it does - complete RO water store station on wheels
  • Chlorinated municipal water or well water
  • TFC membrane at 200 psi, 95-99% salt rejection
  • Two 1.5 cubic foot carbon filter with auto backwash
  • 1.5 cubic foot twin tank softener, auto backwash
  • Stainless multi-stage pump for durability
  • TFC RO membrane, PVC membrane housing
  • Powder-coated steel bracket, two skids joined
  • Two 300 gallon water storage tanks (not shown)
  • Stainless repressurization pump w/10 gallon tank
  • Two 20" Big Blue carbon block post filters
  • Stainless 24 GPM UV water sterilizer
  • Source water test/analysis is recommended
  • Complete water store station
    (two 300 gallon each tanks not shown)


    Click to order
  • Adjustable stainless waste/recycle fixed flow control
  • Inlet/outlet pre-filter gauges, liquid filled system gauge
  • One year factory warranty, designed for optimum water recovery
  • Storage tank pressure switch, low pressure safety switch, feed water solenoid valve
  • Unit and operating cost

  • Unit price $22,230 (FS-4), $20,619 (FS-3), $18,900 (FS-2), $17,955 (FS-1)
  • Crating/shipping from CA is extra, CA residents add state sales tax
  • Replacements: 10" sediment $20, two 20" carbons $78 each, TFC RO membrane $550 each (1,500 GPD)


  • Dimensions
    Model
    Minimum GPD
      Number of membranes  
      Pump  
      Two demountable skids  
      Weight  
      FS-4  
      7,200-6,000  
     4" dia x 40", 4 each 
     3 hp 
     110" w, 31" d, 66" h 
     1,800 lbs. 
      FS-3  
      5,400-4,500  
     4" dia x 40", 3 each 
     2 hp 
     110" w, 31" d, 66" h 
     1,800 lbs. 
      FS-2  
      3,600-3,000  
     4" dia x 40", 2 each 
     2 hp 
     110" w, 31" d, 66" h 
     1,800 lbs. 
      FS-1  
      1,800-1,500  
     4" dia x 40", 1 each 
     1 hp 
     110" w, 31" d, 66" h 
     1,800 lbs. 
      Top  


    Water Store Fill Table/Sink - manual faucets in parallel, high back or low back sink


    Bottle filling table/sink - high back


    Click to order
    Bottle filling table/sink - low back


    Click to order

      Part number  
      Description  
      Price  
    FT-8
    8 parallel faucets, high or low back
    $6,776
    FT-6
    6 parallel faucets, high or low back
    $5,280
    FT-4
    4 parallel faucets, high or low back
    $4,136
    Shipment from CA to you is additional, CA residents add state sales tax
    What it is
  • Pressurized RO water
  • Customers or operators side by side
  • Manually fill bottles
  • Beautifully built, sturdy, easy to keep clean
  • Ample cabinet space below       Top  

  • Water Store Bottle Filling System - rinser, filler, capper and labeler


    12 bottle rinser


    Click to order
    6 bottler filler


    Click to order

    Manual air or electric capper and labeler


    Click to order
    What they are and price
  • Rinser does 12 bottles in parallel
  • Filler with ozone injection system does 6 at a time
  • Manual capper, electrical or pneumatic drive
  • Labeling system
  • High quality stainless steel parts
  • Compact - ideal for small space
  • Total system price is $15,840
  • Crating/shipping from CA is additional
  • CA residents add state sales tax      Top  

  • Water Store Dual Ozone Bottle Rinser - fastest sterilization at 10-15 seconds




    Click to order
    A must-have water store equipment
  • Sterilizes 1-5 gallon water bottles, two at a time
  • 4x the ozone needed to kill bacteria, viruses, systs, spores and algae
  • Three thousand times faster than chlorine
  • Rapidly oxidizes the organic contaminants that cause 90% of taste and odor problems, conventional bottle rinsers often don't
  • No more leaving unwanted soap residues, taste or odors in the container
  • Chamber 304 stainless, all components NSF/FDS/UL/ETL approved
  • Straightforward installation, simple operation
  • Specifications:

  • Water usage: 2.9 GPM @ 40 psi each station
  • Ozone concentration: 1.1 ppm while both station in use
  • Ozone generator: corona discharge, 120 volt with B.F.I. protection
  • Plumbing: water inlet 3/4", drain 1"
  • Dimensions & weight: 43" x 22" x 69", 225 lbs
  • Price
  • Unit price $5,940, plus crating cost of $225
  • Shipping from CA is additional, CA residents add state sales tax
  •       Top  


    Seawater Desalination RO for Marine Craft - rugged, compact, minimum maintenance and durable
    14,400 GPD,  10,800,  7,200,  4,600,  3,600,  2,300,  1,000,  300,  150,  100


    Who needs it?
  • Any sea-going boat owner, especially those on extended trips, with storage tank on board
  • Getting pure drinking/cooking water is as simple as opening the crate and doing simple plumbing
  • Purest and most delicious water (TDS of less than 100 expected) available 24/7 right on your craft
  • You win back initial investment in no time, in convenience, less fuel cost than lugging bulk water
  • Specially designed for simple installation, ruggedness, ease of use, minimum maintenance and longivity
  • Also applicable to brackish water where TDS is higher than 2,000 ppm, lower than 36,000 ppm


  • What it is - portable, complete RO seawater desalination unit
  • Affordable, plentiful fresh water supply for seagoing craft
  • This model produces 100 GPD of pure water from seawater
  • RO membrane at 900 psi works with TDS as high as 36,000 ppm
  • 3/4 HP motor, electrical power 1,000 watt, stainless pump standard
  • One year factory warranty
  • Corrosion free fiberglass, stainless and brass used extensively
  • Minimizes deterioration in the marine environment
  • Sturdy frame is made of corrosion free fiberglass reinforced plastic
  • Portable, 22" long, 18" wide, 14" tall, 70 lbs
  • You can install it if you are handy, a plumber in two hours
  • We provide diagrams and live phone assistance
  • 150 GPD model shown


    How much does it cost?
  • Special sale price $2,646 for 100 GPD unit, special crating $125 and shipping from FL additional
  • Low pressure (source water) cutoff solenoid valve is $495 additional, safety feature, strongly recommended
  • Float switch $76 additional, mounts on storage tank top, shuts off RO unit when tank gets full
  • The price also includes our timely maintenance reminder calls for the life of the unit
  • Economical, membrane typically lasts over 2 years if you keep the sediment filter clean
  • Spare parts: one sediment cartridge $12.50, one 2.5" diameter x 14" long RO membrane $456, shipment extra


  • Larger desalination units - stainless pump and low pressure cutoff safety valve are standard
    Model
    GPD
      Number of membranes  
      Pump  
      Unit envelope and weight  
      Shipping weight  
      SW-14400  
      14,400  
     8" dia x 40" long, 16 each 
     4 x 5 hp 
     92" wide, 40" deep, 42" h, 1,300 lbs 
     1,600 lbs. 
      SW-10800  
      10,800  
     8" dia x 40" long, 12 each 
     3 x 5 hp 
     92" w, 56" d, 30" h, 900 lbs 
     1,200 lbs. 
      SW-7200  
      7,200  
     8" dia x 40" long, 8 each 
     2 x 5 hp 
     92" w, 40" d, 27" h, 620 lbs 
     800 lbs. 
      SW-4600  
      4,600  
     4" dia x 40" long, 4 each 
     2 x 5 hp 
     92" w, 40" d, 27" h, 450 lbs 
     600 lbs. 
      SW-3600  
      3,600  
     4" dia x 40" long, 4 each 
     1 x 5 hp 
     92" w, 28" d, 24" h, 300 lbs 
     380 lbs. 
      SW-2300  
      2,300  
     4" dia x 40" long, 2 each 
     1 x 5 hp 
     52" w, 28" d, 24" h, 250 lbs 
     310 lbs. 
      SW-1000  
      1,000  
     4" dia x 40" long, 1 each 
     1 x 2 hp 
     52" w, 22" d, 18" h, 150 lbs 
     200 lbs. 
      SW-300  
      300  
     4" dia x 14" long, 1 each 
     1 x 1 hp 
     25" w, 23" d, 12" h, 100 lbs 
     130 lbs. 
      SW-150  
      150  
     2.5" dia x 14" long, 1 each 
     1 x 3/4 hp 
     30" w, 18" d, 14" h, 75 lbs 
     100 lbs. 

    Unit price and spares per unit - crating and shipping (from FL) additional, FL destination must add state sales tax
    Model
      Prices FOB FL  
      Shipping crate  
      Sediment x no.  
      Membrane x no.  
      SW-14400  
     $55,250 
     $990 
      $30 x 2  
      $850 x 16  
      SW-10800  
     $43,420 
     $660 
      $30 x 1  
      $850 x 12  
      SW-7200  
     $30,550 
     $528 
      $30 x 1  
      $850 x 8  
      SW-4600  
     $22,343 
     $528 
      $30 x 1  
      $850 x 4  
      SW-3600  
     $18,158 
     $396 
      $30 x 1  
      $850 x 4  
      SW-2300  
     $13,230 
     $264 
      $30 x 1  
      $850 x 2  
      SW-1000  
     $7,350 
     $185 
      $12.50 x 1  
      $850 x 1  
      SW-300  
     $4,830 
     $132 
      $12.50 x 1  
      $630 x 1  
      SW-150  
     $3,066 
     $132 
      $12.50 x 1  
      $496 x 1  
          Top  



    岩佐博士夫妻
    Whole house water filter, factory direct delivery, full warranty, competitive pricing, home water filter
    経営陣

    当社の製品と値段はここをクリック
    オーダーはここをクリック

    飲料水フィルター - シャワーフィルター - アフターケア -
    FAQ - 自然採取ヴィタミン剤 - 会社のプロファイル - 免責事項


    ホームページ

    Crystal Pure Water Company浄水ー装置。COM
    Prosperity Management Inc. 所属
    E-mail(日本語でOK):  sales@purewaterexpress.com
       英語のWeb site: www.purewaterexpress.com 
    電話(日本語でOK): US-978-456-8372、 明確なメッセ-ジには折り返し電話します
    Fax: 978-456-6975;   P.O. Box 47, Harvard, MA 01451 USA

    Copyright 1999: Prosperity Management, Inc., Las Vegas, Nevada